Nissan rims
All Nissan models listed here use the 5x114.3 bolt pattern. We have 374 rim models with this bolt pattern, priced from 73 €/pc. Choose your car to see which rims fit and what else you will need to mount them.
5x114.3 wheels and rims
- 2022-
- 2014-2022
- 2010-2017
- 2017-2025
- 2025-
- 2022-
- 2010-2019
- Bolt pattern (PCD)
- 5x114.3
R16-R20 · 5x114.3
For winter
from 145,00 €
/pc.
4 pcs. = 580,00 € · or 3 payments of 193,33 €
In supplier stock: 8+ pcs
1-2 d.
R16-R19 · 5x114.3
For winter
from 132,00 €
/pc.
4 pcs. = 528,00 € · or 3 payments of 176,00 €
In supplier stock: 4 pcs
5-6 d.
R16-R19 · 5x114.3
For winter
from 158,00 €
/pc.
4 pcs. = 632,00 € · or 3 payments of 210,66 €
In supplier stock: 8+ pcs
11-15 d.
R15-R19 · 5x114.3
For winter
from 133,00 €
/pc.
4 pcs. = 532,00 € · or 3 payments of 177,33 €
In supplier stock: 8+ pcs
11-15 d.
What you need for fitting
New rims often need these too. On the rim page we will show exactly what your car needs.
Hub centric rings
If the rim's centre bore is larger than the car's hub - so the rim centres properly and does not vibrate.
Wheel bolts
The bolt head seat must match the rim's seat. The original bolts often do not fit new rims.
TPMS sensors
If your car has tyre pressure sensors, the new rims need them too.
Tyres
On the rim page we will show the tyre sizes that fit this rim and your car.
Rim brands with the 5x114.3 bolt pattern
Questions about Nissan rims
The bolt pattern is 5x114.3 for these Nissan models: X-Trail IV (T33), X-Trail III (T32), Leaf I (ZE0), Leaf II (ZE1), Leaf III (ZE2), Ariya (FE0), Juke I (F15). If your model is not listed here, choose your car - we will show its bolt pattern and centre bore.
All Nissan and Lexus models in our list share the same bolt pattern - 5x114.3, so the same rim can fit both makes. Centre bore, offset (ET) and approved sizes still vary between variants, so choose your car - the rim page will show whether it fits.
With the 5x114.3 bolt pattern: R15 (32 models, from 73 €/pc.), R16 (129 models, from 73 €/pc.), R17 (147 models, from 89 €/pc.), R18 (177 models, from 116 €/pc.), R19 (147 models, from 173 €/pc.), R20 (107 models, from 143 €/pc.), R21 (26 models, from 306 €/pc.). Which diameters a particular variant may use is set by the car manufacturer - you will see them once you choose your car.
Did not find your model?
Offset (ET), width, centre bore and load vary between variants - you will see them once you choose your car.
Sources: faq2.nissan.co.jp
