Cupra rims
All Cupra models listed here use the 5x112 bolt pattern. We have 493 rim models with this bolt pattern, priced from 55 €/pc. Choose your car to see which rims fit and what else you will need to mount them.
5x112 · DIA 57.1 wheels and rims
- 2020-
- 2020-
- 2018-
- 2021-
- 2024-
- 2024-
- Bolt pattern (PCD)
- 5x112
- Centre bore
- 57.1 mm
- Bolt thread
- M14x1.5
R16-R20 · 5x112
For winter
from 133,00 €
/pc.
4 pcs. = 532,00 € · or 3 payments of 177,33 €
In supplier stock: 8+ pcs
1-2 d.
R16-R20 · 5x112
For winter
from 156,00 €
/pc.
4 pcs. = 624,00 € · or 3 payments of 208,00 €
In supplier stock: 8 pcs
5-6 d.
R18-R19 · 5x112
from 271,00 €
/pc.
4 pcs. = 1084,00 € · or 3 payments of 361,33 €
In supplier stock: 8+ pcs
5-6 d.
R16-R19 · 5x112
from 158,00 €
/pc.
4 pcs. = 632,00 € · or 3 payments of 210,66 €
In supplier stock: 6 pcs
5-6 d.
What you need for fitting
New rims often need these too. On the rim page we will show exactly what your car needs.
Hub centric rings
If the rim's centre bore is larger than the car's hub - so the rim centres properly and does not vibrate.
Wheel bolts M14x1.5
The bolt head seat must match the rim's seat. The original bolts often do not fit new rims.
TPMS sensors
If your car has tyre pressure sensors, the new rims need them too.
Tyres
On the rim page we will show the tyre sizes that fit this rim and your car.
Rim brands with the 5x112 bolt pattern
Questions about Cupra rims
The bolt pattern is 5x112 for these Cupra models: Formentor (KM), Leon IV (KL), Ateca (5FP), Born (K1), Tavascan (KR), Terramar (KP). If your model is not listed here, choose your car - we will show its bolt pattern and centre bore.
57.1 mm: Formentor (KM), Leon IV (KL), Ateca (5FP), Born (K1), Tavascan (KR), Terramar (KP). A rim's centre bore must be the same as the car's hub diameter or larger - a larger one is centred with a centring ring. This page shows only rims with a large enough centre bore.
The Cupra models listed here use M14x1.5 bolts. The bolt head seat must match the rim's seat, so original bolts often do not fit new rims - the rim page shows its seat.
All Cupra and Audi models in our list share the same bolt pattern - 5x112, so the same rim can fit both makes. Centre bore, offset (ET) and approved sizes still vary between variants, so choose your car - the rim page will show whether it fits.
All Cupra and Mercedes-Benz models in our list share the same bolt pattern - 5x112, so the same rim can fit both makes. Centre bore, offset (ET) and approved sizes still vary between variants, so choose your car - the rim page will show whether it fits.
All Cupra and MINI models in our list share the same bolt pattern - 5x112, so the same rim can fit both makes. Centre bore, offset (ET) and approved sizes still vary between variants, so choose your car - the rim page will show whether it fits.
All Cupra and Volkswagen models in our list share the same bolt pattern - 5x112, so the same rim can fit both makes. Centre bore, offset (ET) and approved sizes still vary between variants, so choose your car - the rim page will show whether it fits.
With the 5x112 bolt pattern and a centre bore from 57.1 mm: R15 (35 models, from 67 €/pc.), R16 (119 models, from 71 €/pc.), R17 (185 models, from 84 €/pc.), R18 (263 models, from 102 €/pc.), R19 (231 models, from 158 €/pc.), R20 (189 models, from 180 €/pc.), R21 (76 models, from 196 €/pc.), R22 (34 models, from 252 €/pc.), R23 (12 models, from 482 €/pc.). Which diameters a particular variant may use is set by the car manufacturer - you will see them once you choose your car.
Did not find your model?
Offset (ET), width, centre bore and load vary between variants - you will see them once you choose your car.
Sources: files.pneu.jfnet.de, felgen.jfnet.de
