Choose your car to see which rims fit and what else you will need to mount them.
Filters
46 rims

Results

MAK Magma 6.5x16 5x105 ET39, black · polished (Black Mirror)
6.5x16 · 5x105 · ET39 · DIA 56.6
Black · polished
174,00 € /pc.
4 pcs. = 696,00 € · or 3 payments of 232,00 €
In stock: 8+ pcs 15-22 d.
ATS Streetrallye 6.5x16 5x105 ET38, silver (Polar Silver)
6.5x16 · 5x105 · ET38 · DIA 56.6
Silver
For winter
162,00 € /pc.
4 pcs. = 648,00 € · or 3 payments of 216,00 €
In stock: 6 pcs 15-22 d.
Alutec Singa 6.5x16 5x105 ET41, silver
6.5x16 · 5x105 · ET41 · DIA 56.6
Silver
For winter
127,00 € /pc.
4 pcs. = 508,00 € · or 3 payments of 169,33 €
In stock: 4 pcs 5-6 d.
Alutec Singa 6.5x16 5x105 ET41, black · polished (Diamond Black Frontpolished)
6.5x16 · 5x105 · ET41 · DIA 56.6
Black · polished
165,00 € /pc.
4 pcs. = 660,00 € · or 3 payments of 220,00 €
In stock: 4 pcs 15-22 d.
Dezent TA 6.5x16 5x105 ET38, silver
6.5x16 · 5x105 · ET38 · DIA 56.6
Silver
For winter
143,00 € /pc.
Only 3 pcs. available
In stock: 3 pcs 15-22 d.
RC Design RC19 6.5x16 5x105 ET39, black (Schwarz Glanz (SG))
6.5x16 · 5x105 · ET39 · DIA 56.6
Black
For winter
156,00 € /pc.
Only 2 pcs. available
In stock: 2 pcs 11-15 d.

How to choose

R16 rims with the 5x105 bolt pattern

This page lists R16 rims with 5 bolts on a circle 105 mm in diameter. An R16 rim takes only an R16 tyre. The bolt pattern has to match the hub exactly: patterns that differ by a few millimetres look almost identical, but the bolts then do not clamp the rim properly. Latvian Cabinet Regulation No. 295 of 30 May 2017 treats such a rim as a defect that fails the roadworthiness test.

Most of the R16 tyres in our catalogue come in the sizes 205/55 R16, 215/65 R16, 205/60 R16.

What else to check

If you fit a larger rim than the factory one, the tyre needs a lower profile so that the wheel keeps the original outer size. The car manufacturer decides which sizes the car may use: they are listed in the owner's manual and on the sticker in the driver's door frame. The same Regulation No. 295 requires all rims to be the same size, unless the manufacturer states otherwise.

Rims with the same diameter and bolt pattern can still differ in these dimensions:

  • Centre bore (DIA) - it must be the same size as the hub or larger. A larger bore is centred with hub centric rings; with a smaller one the rim will not fit.
  • Offset (ET) - sets how deep the wheel sits in the arch. The higher the ET, the further inwards the wheel sits. The offset is marked on the back of the rim. The wheel must not stick out beyond the bodywork or touch it.
  • Width - together with the offset, it decides whether the wheel fits in the arch and what tyre widths can be mounted on the rim.
  • Seat - the seat of the bolt head has to match the seat of the rim: cone, ball or flat. The original bolts often do not suit new rims.

Choose your car, and rims that do not fit it drop out of the list.

Before the tyre is mounted

Some things can only be checked on the car itself. Before mounting, put the bare rim on the hub and turn it by hand: it should spin freely and must not catch the brake calliper. Also check that the bolts screw in to their full length. Once a tyre has been mounted, the rim is no longer in the condition you received it in, so do this check beforehand.